Studio Series Table Projects

We have designed and built a few glass table over the past few years. Here are a few images:

 

Ikea Glass Cutting Table

Table_02

Table_02

 

We built a quick glass cutting table using Ikea parts. It took about three hours. We used a custom slide bar, but a 30″ would hang off 1/4″ on each side, or you could use a 24″ glass cutter.

 

Rolling Glass Cutting Table

Table_04

Table_03

We mounted a 36″ Studio cutter on a 38″ x 60″ custom rolling table. We covered the top with Masonite to give it a good surface. The rest of it is made with 2×4’s, 4×4’s for the corners, and plywood.  We assembled it with the Kreg pocket screws, using our Kreg Jig. It tool about 6 hours to complete. That is a full sheet of bullseye glass.

We don’t usually build custom tables as they are expensive to ship and construct, but we are happy to answer design questions.

New Product: Studio Board Mount Kit with Ruler

studio_board_mount_04We have had many requests for a larger cutting width on our Portable glass cutter. We put our heads together and came up with a kit that you can use to mount a Studio series glass cutter on a base that you supply. The kit includes the inch/metric centering ruler used on our Portable glass cutter, and all of the hardware needed to mount any of our Studio series glass cutters on a base of your choice. The new kit retails for $ 65. More information